| Your current point：Zhongda motor--Secunrity notice |
|
|
（As a whole）
Please do
not use without the nameplate of the gear head and motor
or the specifications
of the product catalogues, in
order to prevent, hurting, and damaging device
etc.
Please do not put your fingers and things into
the openings part of gear or motor, in order
to
prevent getting an electric shock, hurting, catching a
fire and damaging device etc.
Please do not use the
injured gear head or motor, in order to prevent hurting,
catching a fire etc.
Please do not put off the
nameplate.
If the products are reformed by the
customers personally, it no longer belong to the
guarantee scope, and our company doesn't undertake
any responsibility.
（Moving）
When
you move it, if it shed off or tilt to one side, it is
very dangerous, please pay more
attention.
（Assembly）
Please must not put the flammable thing
near the gear head and motor, in order to prevent
catching a fire.
Please do not put the things around
motor, which effect ventilation and cooling,
even
burning or catching a fire because of too
heat.
Please do not touch the gear, the top of the
motor shaft and the key slot of the gear with naked
hand,
in order to prevent hurting.
The device may
creating the smoke, food machine etc, please add oil cup
in the assembly part,
in order to prevent leaking oil
then have a bad effect on for the
products.
（Assembly the
main machine）
Please set a
safe cover about the revolving part, in order to prevent
hurting.
Before linking with the other part machine,
please confirm the revolving direction.
If the
direction is not right, which maybe hurt the gear motor
or destroy the device.
（Wiring）
Please don't get in touch with terminal,
when you measure insulated resistance,
in order to
prevent danger of getting an electric
shock.
|
（Wiring）
Please according to wire diagram and usage
manual links with the electrical source,
in order to
prevent getting an electric shock or catching a
fire.
（No terminal box,
please strengthen the insulation of the connection part
surely）
At the electrical
source cable and the motor wire, please do not bend,
stretch, and clip tightly excessively,
in order to
prevent getting an electric.
The terminal box
connects to the ground must be firmly, in order to
prevent getting into electricity.
Please adopt the
electrical source to accord with the nameplate, in order
to prevent burning the motor and catching a
fire.
（Operation）
During the work, please mustn't get close
to or touch the revolving parts (shaft). If something or
somebody engulfs or hurts,
please turn off the
electrical power switch right away and handle at
once.
Please turn off the electrical source switch
when electricity stops, prevent hurting the person and
damaging the device.
Please note, motor with the
thermal protector, when temperature of the motor is
unusual, it turn off the electrical source
automatically, when the temperature of the motor
fall down a fixation data, the motor can work
automatically.
（Note: when
the motor is not burned-out, the motor can work
automatically.）
（The daily check and
maintain）
In daily, you
should keep the motor operating in the normal work
environment.(Except the special model)
While
checking, please do not get close to or touch the
revolving parts (shaft). Maybe something or somebody
engulfs or hurts
（Checking）
Please confirm stock on hand whether or not
accord with the order.Choosing wrong products,
probably lead to damage of motor and damaging the
device
etc..
|
|
|
